Extron Electronics IN1608 MA User Guide - Manual (Page 100)

IN1606 and IN1608 Series Scaling Presentation Switcher • Internal Web Pages 94
Communication Settings Page
The Communication Settings page contains options to adjust device settings for
RS-232 and Ethernet connections. Click the
Communication Settings icon on the Global
Navigation Bar to open the page.
Figure 58. Communication Settings Page
RS-232 settings
1. From the Baud Rate drop-down menu, select the appropriate baud rate.
2. Click the Apply button.
Ethernet settings
To configure the Ethernet settings for use with DHCP:
1. Select the Use DHCP check box.
2. Click the Apply button.
To configure the Ethernet settings with a static IP address:
1. Ensure the Use DHCP check box is not selected.
2. In the IP Address field, enter an IP address.
3. In the Subnet Mask field, enter the subnet mask if required.
4. In the Default Gateway field, enter the default gateway if required.
5. In the DNS Sever field, enter a DNS server name if required.
6. Click the Apply button.
To reset to default settings:
To reset the device to default connection values, click the
Reset to Default button.
To cancel changes:
At any time, click the
Cancel button to keep the last saved settings.