Extron Electronics IN1608 MA User Guide User Manual
Page 71
IN1606 and IN1608 Series Scaling Presentation Switcher • Internal Web Pages
65
Output Configuration panel
The Output Configuration panel contains controls for output resolution and rate, format
settings, switch transitions, and available test pattern selection.
Figure 35.
Output Configuration (IN1608)
NOTE: Output
DTP C
is not available on the IN1606.
Resolution
From the
Resolution
drop-down menu, select the applicable output resolution.
Refresh rate
From the
Refresh Rate
drop-down menu, select the applicable output refresh rate.
Output formats
From the
HDMI A
,
HDMI B
, or
DTP C
drop-down menu, select the applicable digital signal
format.
NOTE:
DTP C
is not available on the IN1606.
Switch transitions
•
Cut
— Switches video directly to the newly selected input.
•
Fade Through Black
— Fades video to a black screen before switching to the newly
selected video.
Test patterns
To aid display device setup and optimization, select a test pattern from the drop-down
menu under the preview window.
Figure 36.
Available Test Patterns
NOTE: No input signal is needed when using a test pattern for display device setup.