Picture adjustment commands – Extron Electronics IN1608 MA User Guide User Manual
Page 48
IN1606 and IN1608 Series Scaling Presentation Switcher • SIS Configuration and Control
42
Command
ASCII Command
(host to scaler)
Response
(scaler to host)
Additional Description
Picture Adjustment Commands
Video mute (defaults to unmuted after a power cycle)
Mute output video
X@
*1B
Vmt
X@
*1
]
Mute video only on output
X@
.
Mute output sync/video
X@
*2B
Vmt
X@
*2
]
Mute sync and video on output
X@
.
Unmute output
X@
*0B
Vmt
X@
*0
]
Umute the output
X@
.
View output mute status
X@
*B
X2*]
View the mute status on output
X@
.
Mute video to black
1B
Vmt1
]
Mute video to black on all outputs.
Mute sync and video
2B
Vmt2
]
Mute video and sync on all outputs.
Unmute sync/video
0B
Vmt0
]
Unmute all outputs.
View mute status on all outputs
B
X5%]
View the mute status on all outputs.
Color (NTSC, PAL, and SECAM inputs only)
Specify a value
EX1%
COLR
}
Colr
X!
*
X1%]
Set the color level on the current input.
Increment value
E
+COLR
}
Colr
X!
*
X1%]
Increase the color level.
Decrement value
E
-COLR
}
Colr
X!
*
X1%]
Decrease the color level.
View
E
COLR
}
X1%]
View the color level setting.
Tint (NTSC inputs only)
Specify a value
EX1%
TINT
}
Tint
X!
*
X1%]
Set the tint on the current input.
Increment value
E
+TINT
}
Tint
X!
*
X1%]
Increase the tint.
Decrement value
E
-TINT
}
Tint
X!
*
X1%]
Decrease the tint.
View
E
TINT
}
X1%]
View the tint setting.
Contrast
Specify a value
EX1%
CONT
}
Cont
X!
*
X1%]
Set the contrast for the current input.
Increment value
E
+CONT
}
Cont
X!
*
X1%]
Increase the contrast.
Decrement value
E
-CONT
}
Cont
X!
*
X1%]
Decrease the contrast.
View
E
CONT
}
X1%]
View the contrast setting.
Brightness
Specify a value
EX1%
BRIT
}
Brit
X!
*
X1%]
Set the brightness on the current input.
Increment value
E
+BRIT
}
Brit
X!
*
X1%]
Increase the brightness.
Decrement value
E
-BRIT
}
Brit
X!
*
X1%]
Decrease the brightness.
View
E
BRIT
}
X1%]
View the brightness setting.
NOTES:
X!
= Input selection
1-6
(IN1606) or
1-8
(IN1608 models)
X@
= Output selection
1
= HDMI A (top)
2
= HDMI B (bottom)
3
= DTP C (IN1608 models)
X1%
= Picture adjustment
0-127
(
64
= default)
X2*
= Video output mute
0
= unmute
1
= mute video
2
= mute video and sync
X5%
= Video mute on all outputs
0
= all outputs are unmuted
1
= at least one output is muted
2
= at least one outupt is muted and sync is disabled