Extron Electronics IN1608 MA User Guide - Manual (Page 86)

IN1606 and IN1608 Series Scaling Presentation Switcher • Internal Web Pages 80
Audio mix configuration
After the audio inputs have been properly configured, select the Mix Controls tab to mix
microphone levels, create a mix of the microphone and program volume, and set bass and
treble settings.
Figure 47. Mix Controls Tab
Mic mix levels
Mic mix levels adjust the individual mic levels to create a proper blend (mix) of the two
microphones. Adjust the Mic 1 or Mic 2 fader to adjust the desired mic/line level.
To adjust the mic mix levels:
1. Click the Mix Controls tab.
2. Adjust the level using any of the following methods:
• Click and drag the fader handle to the desired level.
• Click the fader handle and press the or key to
respectively increase or decrease the level in 1 dB increments (PCS only).
• Click the fader handle and press the or key to
respectively increase or decrease the level in 10 dB increments (PCS only).
• Click in the level text field below the fader and enter a new value. Then, press the
or key to apply the change.
• Click the Up or Down arrow button to the right of the level text field to respectively
increase or decrease the level in 0.1 dB increments.
3. To mute the mic/line gain, click the Mute button below the corresponding Mic fader.