Extron Electronics IN1608 MA User Guide - Manual (Page 73)

IN1606 and IN1608 Series Scaling Presentation Switcher • Internal Web Pages 67
Assigning EDID
To assign EDID to selected inputs:
1. From the inputs group box (table of inputs) on the right, select the check boxes for the
desired inputs.
2. From the Available EDIDs or Connected Outputs section on the left, select the desired
EDID.
3. From the inputs group box, click the Assign button to assign EDID to the selected input
or inputs.
To assign EDID to all inputs:
1. From the Favorites (PCS only), Connected Outputs, or Available EDIDs section, select
an EDID.
2. From the inputs group box, click the Assign to All button.
NOTE: Checked or unchecked inputs are ignored and the EDID is assigned to all
inputs.
To match the selected inputs to the current output resolution:
Matching the output resolution is the default value for all inputs.
1. From the inputs group box (table of inputs) on the right, select the check boxes for the
desired inputs.
2. In the Output Resolution panel, click the Match Output button.
Adding EDID to the EDID Library
1. Click the Add EDID to Library button. The Browse Add EDID to Library window
opens.
2. Navigate to the desired EDID file location and select it.
NOTE: Valid EDID files have a .bin file extension.
3. Click the Open button. The EDID is added to the Available EDIDs section.
Saving EDID to the EDID Library
1. From the Connected Outputs or Available EDIDs, right-click on an EDID.
2. Select Save to EDID Library .
3. Click the OK button to save the file.
NOTE: Saving a factory scaler EDID exports an HDMI, LPCM-2Ch EDID to the PC. The
file is saved as a .bin file.