Extron Electronics IN1608 MA User Guide - Manual (Page 91)

IN1606 and IN1608 Series Scaling Presentation Switcher • Internal Web Pages 85
For analog outputs 1 and 2:
1. Click the Output tab.
2. If desired, deselect the Mic/Line check box to not include the mic/line inputs in the
amplified output (this is selected by default).
3. In each Mix Options panel, click the desired radio button. The two outputs can be
mixed together (see the table below).
Output 1 Output 2 Result
Left Program Right Program Output 1 and 2 act as a stereo pair (default).
L+R Program L+R Program L and R program audio are summed on each
output. They act as unique, independent
outputs with or without mic.
No Program No Program No program audio. Output 1 and 2 are treated
as unique, independent outputs with or without
mic.
For the variable analog output:
1. Click the Output tab.
2. If desired, deselect the Mic/Line check box to not include the mic/line inputs in the
amplified output (this is selected by default).
3. In the Mix Options panel, click the desired radio button. The options include:
• Stereo Program — Outputs program audio as left and right stereo.
• Dual Mono Program — Sums left and right program audio and outputs it on each
channel.
• No Program — Mutes program audio.
For digital outputs (HDMI A and B or DTP C for IN1608 models):
1. Click the Output tab.
2. If desired, click the Mic/Line check box to include the mic/line inputs in the output.
3. From the Mix Options panel, click the desired radio button. The options include:
• Stereo Program — Outputs program audio as left and right stereo.
• Dual Mono Program — Sums left and right program audio and outputs it on each
channel.
• No Program — Mutes program audio.