Extron Electronics IN1608 MA User Guide User Manual
Page 105
IN1606 and IN1608 Series Scaling Presentation Switcher • Internal Web Pages
99
Reset Device Page
This page allows the user to reset the device. Click on the
Reset Device
icon on the
Global Navigation Bar to open the page.
Figure 63.
Reset Device Page
There are three reset options:
•
Reset Device Settings (Retains TCP/IP Settings) — Resets the settings associated
with input settings, the output image, EDID, and audio, and also includes presets and
auto memories (excludes communication settings).
This is equivalent to the
E
ZXXX
}
SIS command.
NOTE: Communication settings include the IP address, subnet mask, gateway
IP address, device name, DHCP setting, and port mapping.
•
Reset Device Settings and Delete Files (Retains TCP/IP Settings) — Resets
all settings on the device to factory defaults (deletes user files), except the Ethernet
settings.
This is equivalent to the
E
ZY
}
SIS command.
•
Reset All Settings and Delete Files — Resets all settings on the device to factory
defaults (deletes user files) including the communication settings.
This is equivalent to the
E
ZQQQ
}
SIS command.
NOTES:
•
The default IP address is 192.168.254.254.
•
The default DHCP setting is Off.
To reset the device:
1.
Click the radio button of the desired reset option.
2.
Click the
Apply
button. A confirmation dialog box opens.
3.
In the dialog box, click the
Reset
button to continue with the reset, or the
Cancel
button to abort the reset.