Xylem H-5223 - Manual (Page 99)

Command: GOESSTCOLUMNnSHEFCODE=XX
Description: Set the SHEF code for the n th column of self timed GOES data.
Parameters: ‘n’ ranges from 1-20.
Response: None.
Example: -> GOESSTCOLUMN3SHEFCODE=DT 5 Command sent to the XL™.
rs Response from the XL™.
Command: GOESRRCHANNEL?
Description: Read the channel to be used for GOES random transmissions.
Parameters: None.
Response: An ASCII text string is returned with the channel.
Example: -> GOESRRCHANNEL? 5 Command sent to the XL™.
GOES RR CHANNEL = 123
rs Response sent to the host system.
Command: GOESRRCHANNEL=XXX
Description: Set the channel for random transmissions of the GOES radio.
Parameters: The channel is a 3 character decimal value, ranging from 000-200.
Response: None.
Example: -> GOESRRCHANNEL=111
5 Command sent to the XL™.
rs Response sent to the host system.
Command: GOESRRRATE?
Description: Read the random transmission rate. This determines the window during which the
GOES radio will transmit after detecting a random trigger.
Parameters: None.
Response: An ASCII text string is returned in the format of hh:mm:ss.
C-40 Remote Operation (Command Mode)
H-5223