H-5223 – Xylem H-5223 User Manual
Page 91

Command:
LOGCOLUMNnDIGITS?
Description:
Read the number of digits to be displayed after the decimal point.
Parameters:
‘n’ can range from 1-25.
Response:
The response is an ASCII text string with the number of digits for the n
th
column.
Example:
-> LOGCOLUMN2DIGITS?
5
Command sent to the XL™.
Log Column 2 Digits = 1
rs
Response from the XL™.
Command:
LOGCOLUMNnDIGITS=XX
Description:
Set the number of digits to which the corresponding value is to be expressed when it
is logged to the flash card.
Parameters:
‘n’ ranges from 1-25.
Response:
None.
Example:
-> LOGCOLUMN1DIGITS=2
5
Command sent to the XL™.
rs
Response from the XL™.
C.11 GOES Commands
Command:
GOESMODE?
Description:
Read the current mode of operation of the GOES radio.
Parameters:
None.
Response:
An ASCII text string is returned. The response will be “None ”, “Timed ”,
“Random”, or “Both “.
Example:
-> GOESMODE?
5
Command sent to the XL™.
GOES Mode = Timed
rs
Response sent to the host system.
Command:
GOESMODE=XXXXXX
Description:
Set the current mode of GOES radio operation.
C-32 Remote Operation (Command Mode)
H-5223