Xylem H-5223 - Manual (Page 74)

Example: ->DIRDATACARD 5 Command sent to XL™.
Site01.001 26,103 04/04/01 18:01
Site01.002 45,228 04/04/03 04:15
Site01.003 6,846 04/04/04 21:33
rs Response sent to the host system.
Command: DIRINTERNALDATA
Description: Get a list of the files in the internal data memory.
Parameters: None.
Response: See DIRDATACARD above.
Example: See DIRDATACARD above.
Command: DUMPDATACARDFILE
Description: Transmits the file, specified by filename, through the serial port. If filename is not
found, nothing is transmitted. Use DIRDATACARD to get the names of the files
on the data card.
Parameters: The filename is specified by filename.
Response: The XL™ responds by transmitting the specified file.
Example: ->DUMPDATACARDFILE SITE1.001 5 Command sent to XL™.
rs Data file sent from the XL™.
MM/DD/YY HH:MM:SS Stage Temp
03/01/01 12:00:00 24.83475 12.58436
rs
03/01/01 12:01:00 24.72364 12.54357
rs
03/01/01 12:02:00 24.63845 12.56457
rs
|
|
03/01/01 13:45:00 24.38375 12.52645 rs
03/01/01 13:46:00 24.83375 12.55673 rs
03/01/01 13:47:00 24.83745 12.56535 rs
rs
Done, Close File rs
Command: DUMPINTERNALDATAFILE
Description: Transmits the file, specified by filename, through the serial port. If filename is not
H-5223
Remote Operation (Command Mode) C-15