Xylem H-5223 - Manual (Page 94)

Parameters: None.
Response: An ASCII text string is returned in the format of hh:mm:ss.
Example: -> GOESSTRATE? 5 Command sent to the XL™.
GOES ST Rate = 00:04:00 rs Response sent to the host system.
Command: GOESSTRATE=hh:mm:ss
Description: Set the transmission rate for the Self Timed mode of the GOES radio.
Parameters: The new rate is to be entered in the format of HH:MM:SS, where H is hours, M is
minutes, and S is seconds.
Response: None.
Example: -> GOESSTRATE=00:08:00 5 Command sent to the XL™.
rs Response sent to the host system.
Command: GOESSTOFFSET?
Description: Read the Self Timed transmission offset. This is a time value, indicating how long
after midnight the first transmission takes place.
Parameters: None.
Response: An ASCII text string is returned in the format of hh:mm:ss.
Example: -> GOESSTOFFSET? 5 Command sent to the XL™.
GOES ST Offset = 00:02:00 rs Response sent to the host system.
Command: GOESSTOFFSET=hh:mm:ss
Description: Set the transmission offset for the Self Timed mode of the GOES radio.
Parameters: The new offset is to be entered in the format of HH:MM:SS, where H is hours, M is
minutes, and S is seconds.
Response: None.
Example: -> GOESSTOFFSET=00:03:00 5 Command sent to the XL™.
H-5223
Remote Operation (Command Mode) C-35