Xylem H-5223 - Manual (Page 95)

rs Response sent to the host system.
Command: GOESSTFORMAT?
Description: Read the Self Timed transmission data format. This is the format in which the data
is transmitted. The format can be either SHEF or BINARY.
Parameters: None.
Response: An ASCII text string is returned indication the format.
Example: -> GOESSTFORMAT?
5 Command sent to the XL™.
GOES ST Format = BINARY
rs Response sent to the host system.
Command: GOESSTFORMAT=XXXXXX
Description: Set the data format for the Self Timed mode of the GOES radio.
Parameters: The new format can be either “BINARY” or “SHEF”.
Response: None.
Example: -> GOESSTFORMAT=SHEF
5 Command sent to the XL™.
rs Response sent to the host system.
Command: GOESSTORDER?
Description: Read the Self Timed transmission data order. This is the order in which the data is
transmitted. The order can be either SCAN or CHANNEL.
Parameters: None.
Response: An ASCII text string is returned indication the format.
Example: -> GOESSTORDER? 5 Command sent to the XL™.
GOES ST Order = SCAN
rs Response sent to the host system.
Command: GOESSTORDER=XXXXXX
Description: Set the data order for the Self Timed mode of the GOES radio.
Parameters: The new order can be either “CHANNEL” or “SCAN”.
C-36 Remote Operation (Command Mode)
H-5223