H-5223 – Xylem H-5223 User Manual
Page 97
Command:
GOESSTAPPENDBATTERY=XXX
Description:
Set the append battery flag.
Parameters:
The flag can be set to either “Yes” or “No “.
Response:
None.
Example:
-> GOESSTAPPENDBATTERY=NO
5
Command sent to the XL™.
rs
Response sent to the host system.
Command:
GOESSTSCANSPERXMIT?
Description:
Read the number of scans to be transmitted with each transmission.
Parameters:
None.
Response:
An ASCII text string with the number of scans per transmission.
Example:
-> GOESSTSCANSPERXMIT?
5
Command sent to the XL™.
GOES ST Scans Per Xmit = 16
rs
Response from the XL™.
Command:
GOESSTSCANSPERXMIT=XXX
Description:
Set the number of scans per transmission.
Parameters:
This value can range from ???-???.
Response:
None.
Example:
-> GOESSTSCANSPERXMIT=32
5
Command sent to the XL™.
rs
Response sent to the host system.
Command:
GOESSTBUFFERCOUNT?
Description:
Counts the number of bytes currently in the GOES self timed buffer.
Parameters:
None.
Response:
An ascii text string is returned with an integer number representing the buffer count
C-38 Remote Operation (Command Mode)
H-5223