Xylem H-5223 - Manual (Page 63)

SCANNING COMMANDS
SCANNING?/= Scanning on or off
SCANRATE?/= Amount of time between scans
NEXTSCAN? Amount of time until next scan
NEXTSCANAT?/= Time of next scan
SENSOR INPUT COMMANDS (Analog Inputs)
ANALOG1-4? Analog sensor value
ANALOG1-4SLOPE?/= Analog sensor slope
ANALOG1-4OFFSET?/= Analog sensor offset
DIGITAL I/O COMMANDS
DIGITAL1-2? Return the value of digital 1 or 2.
DIGITAL1-2= Set digital x to the indicated value (for counter
mode).
DIGITAL1-2MODE?/= Digital mode (input, pulse, continuous, counter ...)
DIGITAL1-2TRIGGERSOURCE?/= Source of value to evaluate for alarm conditions
DIGITAL1-2TRIGGERTYPE?/= Trigger type (always, > set point, ...)
DIGITAL1-2TRIGGERPOINT?/= Point with which the source value is compared
DIGITAL1-2PULSELENGTH?/= Length in ms of output pulse or warmup delay
COUNTERSLOPE?/= Counter slope
RESETCOUNTERS Reset all of the counters
C-4 Remote Operation (Command Mode)
H-5223