Xylem H-5223 - Manual (Page 86)

Description: Issue an identify command on the SDI-12 bus using the address specified by
SDITESTADDRESS.
Parameters: None.
Response: The XL™ takes the response it receives on the SDI-12 bus and returns it. If no
response is received, the XL™ responds with “Communication Timed Out”. The
response to the identify command is as follows:
allccccccccmmmmmmvvvxx...xx
a: sensor address (“0-9", “A-Z”, “a-z”, “*”, “?”).
ll: SDI-12 version compatibility level, e.g. version 1.2 is
represented as “12”.
cccccccc: 8 character vendor identification to be specified by the
vendor and usually in the form of a company name or its
abbreviation.
mmmmmm: 6 character field specifying the sensor model number.
vvv: 3 character field specifying the sensor version number.
xx...xx: variable length field (up to a maximum of 13) to be used for
serial number or other specific sensor information not
relevant to the operation of the data recorder.
Example: -> SDIIDENTIFY 5 Command sent to XL™.
112 DAA H-415vvvS#123456V101 rs Response from XL™.
Command: SDIVERIFY
Description: Issue a verify command on the SDI-12 bus using the address specified by
SDITESTADDRESS.
Parameters: None.
Response: The XL™ takes the response it receives on the SDI-12 bus and returns it. If no
response is received, the XL™ responds with “Communication Timed Out”. The
response to the verify command depends on the manufacturer of the sensor.
Consult the documentation for the sensor for further information.
H-5223
Remote Operation (Command Mode) C-27