Xylem H-5223 - Manual (Page 89)

Description: Set the auto print flag.
Parameters: The flag can be set to either “On ” or “Off“.
Response: None.
Example: -> AUTOPRINT=ON 5 Command sent to the XL™.
rs Response from the XL™.
C.10 Logging Commands
Command: LOGGING?
Description: Read the logging status flag. If this flag is set, then the XL™ will log data to the
internal data memory.
Parameters: None.
Response: An ASCII text string is returned with either “Yes” or “No “.
Example: -> LOGGING? 5 Command sent to the XL™.
Logging = Yes
rs Response from the XL™.
Command: LOGGING=XXX
Description: Set the logging status flag.
Parameters: The flag can be set to either “Yes” or “No “.
Response: None.
Example: -> LOGGING=NO
5 Command sent to the XL™.
rs Response from the XL™.
Command: LOGCOLUMNnSOURCE?
Description: Read the source of the n th column of data to be logged to the flash card.
Parameters: ‘n’ can range from 1-25, indicating the corresponding column.
Response: The source of the column corresponding to ‘n’ (e.g. Stage, PSI, Temp).
C-30 Remote Operation (Command Mode)
H-5223