Xylem H-5223 - Manual (Page 92)

Parameters: The flag can be set to “None ”, “Timed ”, “Random”, or “Both “.
Response: None.
Example: -> GOESMODE=RANDOM 5 Command sent to the XL™.
rs Response sent to the host system.
Command: GOESADDRESS?
Description: Read the 8 hexadecimal character DCP address that the GOES radio uses to
interface with the collection satellite.
Parameters: None.
Response: An ASCII text string is returned with the DCP address. It is 8 characters long, and
each character ranges from 0-9, A-F.
Example: -> GOESADDRESS? 5 Command sent to the XL™.
GOES Address = 14C028AF rs Response sent to the host system.
Command: GOESADDRESS=XXXXXXXX
Description: Set the GOES DCP address.
Parameters: The address is to be 8 characters long. Each character ranges from 0-9,A-F.
Response: None.
Example: -> GOESADDRESS=02A488C5 5 Command sent to the XL™.
rs Response sent to the host system.
Command: GOESTIME?
Description: Read the time from the GOES radio. This time is used to synchronize with the
satellite.
Parameters: None.
Response: An ASCII text string is returned with the GOES time.
Example: -> GOESTIME? 5 Command sent to the XL™.
GOES Time = 17:42:25 rs Response sent to the host system.
H-5223
Remote Operation (Command Mode) C-33