Xylem H-5223 - Manual (Page 96)

Response: None.
Example: -> GOESSTORDER=CHANNEL 5 Command sent to the XL™.
rs Response sent to the host system.
Command: GOESSTSENDSHEFCODES?
Description: Read the send SHEF codes flag. If this is set to “YES”, each self timed GOES
transmission will include SHEF code column headers.
Parameters: None.
Response: An ASCII text string is returned consisting of either “Yes” or “No “.
Example: -> GOESSTSENDSHEFCODES? 5 Command to XL™.
GOES ST Send SHEF Codes = No rs Response from XL™.
Command: GOESSTSENDSHEFCODES=XXX
Description: Set the flag to send SHEF codes with each self-timed transmission.
Parameters: The flag can be set to either “Yes” or “No “.
Response: None.
Example: -> GOESSTSENDSHEFCODES=NO 5 Command sent to the XL™.
rs Response from the XL™.
Command: GOESSTAPPENDBATTERY?
Description: Read the append battery flag. If this flag is set, a battery reading will be appended
to each GOES self-timed transmission.
Parameters: None.
Response: An ASCII text string is returned indicating whether or not the XL™ will append a
battery reading when transmitting data. The response is either “Yes” or “No “.
Example: -> GOESSTAPPENDBATTERY? 5 Command sent to the XL™.
GOES ST Append Battery = Yes rs Response from the XL™.
H-5223
Remote Operation (Command Mode) C-37