Xylem H-5223 - Manual (Page 101)

Command: GOESRRTRIGGERSOURCE?
Description: Read the source that will be evaluated when determining whether or not to trigger a
random report.
Parameters: None
Response: The response will be an ASCII text string with the current RR trigger source (e.g.
Stage, PSI, Temp).
Example: -> GOESRRTRIGGERSOURCE? 5 Command sent to XL™.
GOES RR Trigger Source = Stage
rs Response from XL™.
Command: GOESRRTRIGGERSOURCE=XXXXXX
Description: Set the GOES random report trigger source.
Parameters: The new trigger source value for the random report (e.g. Stage, PSI, Temp).
Response: None.
Example: -> GOESRRTRIGGERSOURCE=PSI 5 Command sent to the XL™.
rs Response sent to the host system.
Command: GOESRRTRIGGERPOINT?
Description: Read the trigger point for the GOES random report. The value indicated by RR
source is compared to this value. Depending on the RR trigger mode, different
comparisons will be made. If the trigger conditions are met, a random report is
generated.
Parameters: None.
Response: An ASCII text string is returned with a real number indicating the trigger point.
Example: -> GOESRRTRIGGERPOINT? 5 Command sent to XL™.
GOES RR Trigger Point = 2.5 rs Response from XL™.
Command: GOESRRTRIGGERPOINT=XXXXX
C-42 Remote Operation (Command Mode)
H-5223