Xylem H-5223 - Manual (Page 84)

Parameters: There are two digital channels, so n can be either 1 or 2. The command accepts an
integer number for the pulse length.
Response: None.
Example: -> DIGITAL1PULSELENGTH=150 5 Command sent to the XL™.
rs Response from the XL™.
Command COUNTERSLOPE?
Description: Read the counter slope. This value scales raw counts to the value given to the user.
Parameters: None.
Response: The response is an ASCII text string representing the slope value. The response
will be followed by a carriage return, line feed.
Example: -> COUNTERSLOPE? 5 Command sent to the XL™
Counter Slope = 0.01 rs Response sent to the host system.
Command: COUNTERSLOPE=XXXXX
Description: Set the counter slope. This value scales raw counts to the value given to the user.
Parameters: This command accepts an ASCII string representing the new slope value.
Response: None.
Example: -> COUNTERSLOPE=1.0 5 Command sent to the XL™.
rs Response sent to the host system.
Command: RESETCOUNTERS
Description: Reset both total and summation counters to zero.
Parameter: None.
Response: None.
Example: -> RESETCOUNTERS 5 Command sent to the XL™
rs Response sent to the host system.
H-5223
Remote Operation (Command Mode) C-25