Bell & Gossett 10 001 265R5 TechnoForce Pump Controller - Manual (Page 8)

TECHNOFORCE Installation, Operation, and Maintenance 2
1.3.1 Hazard levels
Hazard level Indication
DANGER: A hazardous situation which, if not avoided, will
result in death or serious injury.
WARNING: A hazardous situation which, if not avoided, could
result in death or serious injury.
CAUTION: A hazardous situation which, if not avoided, could
result in minor or moderate injury.
NOTICE: • A potential situation which, if not avoided, could
result in undesirable conditions.
• A practice not related to personal injury.
1.3.2 Hazard categories
Hazard categories can either fall under hazard levels or let specific symbols replace the ordinary hazard level
symbols.
Electrical hazards are indicated by the following specific symbol.
Electrical Hazard:
These are examples of other categories that can occur. They fall under the ordinary hazard levels and may use
complementing symbols:
• Crush hazard
• Cutting hazard
• Arc flash hazard
1.4 Environmental safety
1.4.0 The work area
Always keep the station clean to avoid and/or discover emissions.
1.4.1 Waste and emissions regulation
Observe these safety regulations regarding waster and emissions:
• Appropriately dispose of all waste.
• Handle and dispose of the processed liquid in compliance with applicable environmental regulations.
• Clean up all spills in accordance with safety and environmental procedures.
• Report all environmental emissions to the appropriate authorities.
1.4.2 Electrical installation
For electrical installation recycling requirements, consult your local electric utility.
1.5 Recycling guidelines
Always follow local laws and regulations regarding recycling.
Introduction and Safety