Bell & Gossett 10 001 265R5 TechnoForce Pump Controller - Manual (Page 30)

TECHNOFORCE Installation, Operation, and Maintenance 24
4.10.15 Date, time menu
Paths: Status Screens / Set up(3) / System(3) / Date, Time(7)
See the following table for all DATE, TIME menu items
Date, time Menu Items
Menu Item Variable Default Range Field
Value
Date/Time MM
Enter the current month using both digits,
example Jan. should be entered as 01.
DD
Enter the current date using both digits, example
the 6th should be entered as 06.
YYYY
Enter the current year using all 4 digits.
HH
Enter the hours using the 24 hour format,
example 9:00 p.m. should be entered as 21.
MM
Enter the minutes using both digits.
Display 24 Hour Fmt: ? (Y/N) N Y or N
Press YES/7 key and ENTER key to display the
time in the 24 hour format. Press NO/0 key and
ENTER key to display the time in
AM/PM format.
Daylite Savings Tm: ?(Y/N) N Y or N
Press YES/7 key and ENTER key for automatic set back
during daylight saving time.
Press NO/0 key and ENTER key to disable the automatic
set back during daylight savings time
4.10.16 Password menu
Paths: Status Screens / Set up(3) / System(3) / Password(8)
See the following table for all
PASSWORD menu items
Password Menu Items
Menu Item Variable Default Range Field
Value
Password ENABLE PASSWORD TO SETUP MENU: ? N Y or N
Press YES/7 key and ENTER key for password
protection of the entire setup menu.
If the above is set to YES, the user will be prompted to
input a password prior to entering the Setup Menu. Upon
exiting the above screen, the user will be prompted
to define and confirm a new password.
ENABLE PASSWORD TO SET POINT MENU: ? N Y or N
Press YES/7 key and ENTER key for password protection
of the entire set point menu.
New ENTER NEW PASSWORD None 0-
Password > _ _ _ _ _ _< 999999
If either of the above are set to yes this screen prompts
the user to define the password.
Installation