Bell & Gossett S14141B 70X Multiple Pump Pressure Booster Systems - Manual

INSTALLER: PLEASE LEAVE THIS MANUAL FOR THE OWNER’S USE.
DESCRIPTION
A Bell & Gossett Packaged Pressure Booster System is factory
assembled, tested and shipped as a complete modular unit.
Each Pressure Booster System is tested to internal quality
standards.
The information contained in this manual is intended to assist
operating personnel by providing information on the charac-
teristics of the purchased equipment. It does not relieve the
user of the responsibility to adhere to local codes and ordi-
nances and the use of accepted practices in the installation,
operation and maintenance of this equipment. Further infor-
mation pertaining to the installation, operation, and mainte-
nance can be found in the I.O.M.s for the specific equipment
provided.
OPERATIONAL LIMITS
See unit nameplate for pump capacity, boost, full load current
draw, and operating voltage. The pump discharge pressure
must not exceed 175 PSI unless specifically designed.
SAFETY
INSTRUCTIONS
This safety alert symbol will be used in this manual and on the
Safety Instruction decal to draw attention to safety related
instructions. When used, the safety alert symbol means
ATTENTION! BECOME ALERT! YOUR SAFETY IS INVOLVED!
FAILURE TO FOLLOW THE INSTRUCTION MAY RESULT IN
A SAFETY HAZARD!
70X Multiple Pump
Pressure Booster Systems
Installation, Operation and
Service Instructions
INSTRUCTION MANUAL
S14141B