Bell & Gossett 10 001 265R5 TechnoForce Pump Controller User Manual

Page 59

TECHNOFORCE Installation, Operation, and Maintenance

Maintenance

6.14.12 Events

Paths: Status Screens / Log(5) / Operation(4) / Events(3)
The display now shows:
Selection: # 0=Exit
1=System On/Off
2=Alternation
3= Sys Rset 4=Events
Use the appropriate numeric key to select the desired sub-menu, then press the

ENTER key. A detailed

description of each sub-menu appears.

6.14.13 System on/off

Paths: Status Screens / Log(5) / Operation(4) / Events(3) / System On Off(1)
The display now shows:
MMDD HHMM Start/Stop
MMDD HHMM Start/Stop
MMDD HHMM Start/Stop
MMDD HHMM Start/Stop
Every time the

START/STOP key is pressed, the event will be logged by showing the system start/stop state.

The forty most recent logs will be stored. The date is displayed in MMDD format and the time in 24 hour

HHMM format. The most recent event will be shown first. Press

NEXT/( ) and

PREV/( ) to view more log events. Press CLEAR to exit.

6.14.14 Alternation

Paths: Status Screens / Log(5) / Operation(4) / Events(3) / Alternation(2)
The display now shows:
MMDD HHMM Seq#
MMDD HHMM Seq#
MMDD HHMM Seq#
MMDD HHMM Seq#
Every time the pump sequence is changed, the event will be logged by showing the sequence. The forty most

recent logs will be stored. The date is displayed in MMDD format and the time in 24 hour HHMM format.

The most recent event will be shown first. Press

NEXT/( ) and PREV/( ) to view more log events. Press

CLEAR to exit.

6.14.15 Sys Rset

Paths: Status Screens / Log(5) / Operation(4) / Events(3) / Sys Rset(3)
The display now shows:
MMDD HHMM Sys Reset Message
MMDD HHMM Sys Reset Message
MMDD HHMM Sys Reset Message
MMDD HHMM Sys Reset Message
Every time the system is reset, the event will be logged by showing the system reset. The forty most recent logs

will be stored. The date is displayed in MMDD format and the time in 24 hour HHMM format. The most recent

event will be shown first. Press

NEXT/( ) and PREV/( ) to view more log events. Press CLEAR to exit.

▲