B&B Electronics EIRP610-2SFP-T - Manual - Manual (Page 94)

Web-Based Management
6.20.2 Trap Configuration
A trap manager is a management station that receives the trap messages generated by the
switch. If no trap manager is defined, no traps will be issued. To define a management
station as a trap manager, assign an IP address, enter the SNMP community strings, and
select the SNMP trap version.
 IP Address: Enter the IP address of the trap manager.
 Community: Enter the community string for the trap station.
 Trap Version: Select the SNMP trap version type—v1 or v2c.
 Click
Add .
 To remove the community string, select the community string listed in the current
managers field and click Remove .
Trap Managers interface
88 Manual Documentation Number EIRP610-2SFP-T – 0912m
www.bb-elec.com
www.bb-europe.com