Port commands set – B&B Electronics EIRP610-2SFP-T - Manual User Manual
Page 126
Command Sets
Netstar Commands
Level Description
Example
no security telnet
G
Disable IP security of
telnet server
switch(config)#no security telnet
Port Commands Set
Netstar Commands
Level Description
Example
interface fastEthernet
[Portid]
G
Choose the port for
modification.
switch(config)#interface
fastEthernet 2
duplex
[full | half]
I
Use the duplex
configuration command
to specify the duplex
mode of operation for
Fast Ethernet.
switch(config)#interface
fastEthernet 2
switch(config-if)#duplex full
speed
[10|100|1000|auto]
I
Use the speed
configuration command
to specify the speed
mode of operation for
Fast Ethernet., the speed
can‘t be set to 1000 if the
port isn‘t a giga port..
switch(config)#interface
fastEthernet 2
switch(config-if)#speed 100
no flowcontrol
I
Disable flow control of
interface
switch(config-if)#no flowcontrol
security enable
I
Enable security of
interface
switch(config)#interface
fastEthernet 2
switch(config-if)#security enable
no security
I
Disable security of
interface
switch(config)#interface
fastEthernet 2
switch(config-if)#no security
120
Manual Documentation Number EIRP610-2SFP-T
– 0912m