B&B Electronics EIRP610-2SFP-T - Manual - Manual (Page 137)

Command Sets
Netstar Commands Level Description Example
[MAC] (filter)
no mac-address-table G Remove dynamic entry
of MAC address table
switch(config)#no mac-address-table
SNMP Commands Set
Netstar Commands Level Description Example
snmp system-name
[System Name]
G Set SNMP agent system
name
switch(config)#snmp system-name
l2switch
snmp system-location
[System Location]
G Set SNMP agent system
location
switch(config)#snmp system-location
lab
snmp system-contact
[System Contact]
G Set SNMP agent system
contact
switch(config)#snmp system-contact
where
snmp agent-mode
[v1v2c|v3|v1v2cv3]
G Select the agent mode of
SNMP
switch(config)#snmp agent-mode
v1v2cv3
snmp community-strings
[Community]
right
[RO/RW]
G Add SNMP community
string.
switch(config)#snmp community-
strings public right rw
snmp-server host
[IP address]
community
[Community-string]
trap-version
[v1|v2c]
G Configure SNMP server
host information and
community string
switch(config)#snmp-server host
192.168.1.50 community public
trap-version v1
(remove)
Switch(config)#
no snmp-server host
192.168.1.50
snmpv3 context-name
[Context Name ]
G Configure the context
name
switch(config)#snmpv3 context-
name Test
snmpv3 user G Configure the userprofile switch(config)#snmpv3 user test01
131 Manual Documentation Number EIRP610-2SFP-T – 0912m
www.bb-elec.com
www.bb-europe.com