B&B Electronics EIRP610-2SFP-T - Manual - Manual (Page 36)

Console Management
5.4 CLI Management
The system supports Command Line Interface (CLI) management. After you log into the
system, you will see a command prompt. To enter the CLI management interface, type in
―enable‖ and press enter.
CLI command interface
The following table lists the CLI commands and description.
5.5 Commands Level
Modes Access Method Prompt Exit Method About This Mode1
User EXEC
Begin a session
with your switch.
switch>
Enter logout
or quit.
The user commands available
at the user level are a subset
of those available at the
privileged level.
Use this mode to
• Perform basic tests.
• Display system information.
Privileged
EXEC
Enter the enable
command while
in User EXEC
mode.
switch#
Enter disable
to exit.
The privileged command is
the advanced mode.
Use this mode to
• Display advanced function
status
• Save configuration
Global Enter the switch To exit to Use this mode to configure
30 Manual Documentation Number EIRP610-2SFP-T – 0912m
www.bb-elec.com
www.bb-europe.com