B&B Electronics EIRP610-2SFP-T - Manual - Manual (Page 57)

Web-Based Management
Local Time Zone Conversion from UTC Time at 12:00 UTC
ZP5 - USSR Zone 4 +5 hours 5 pm
ZP6 - USSR Zone 5 +6 hours 6 pm
WAST - West Australian Standard +7 hours 7 pm
CCT - China Coast, USSR Zone 7 +8 hours 8 pm
JST - Japan Standard, USSR Zone 8 +9 hours 9 pm
EAST - East Australian Standard GST
Guam Standard, USSR Zone 9
+10 hours 10 pm
IDLE - International Date Line
NZST - New Zealand Standard
+12 hours Midnight
 SNTP Sever URL: Set the SNTP server IP address. You can assign a local network
time server IP address or an internet time server IP address.
 Switch Timer: When the switch has successfully connected to the SNTP server whose
IP address was assigned in the column field of SNTP Server URL, the current
coordinated time is displayed here.
 Daylight Saving Period: Set up the Daylight Saving beginning date/time and Daylight
Saving ending date/time. Please key in the value in the format of ‗YYYYMMDD‘ and
‗HH:MM‘ (leave a space between ‗YYYYMMDD‘ and ‗HH:MM‘).
 YYYYMMDD: an eight-digit year/month/day specification.
 HH:MM: a five-digit (including a colon mark) hour/minute specification.
For example, key in ‗20070701 02:00‘ and ‗20071104 02:04‘ in the two column fields
respectively to represent that DST begins at 2:00 a.m. on March 11, 2007 and ends at
2:00 a.m. on November 4, 2007.
 Daylight Saving Offset (mins): For non-US and European countries, specify the
amount of time for day light savings. Please key in the valid figure in the range of
minute between 0 and 720, which means you can set the offset up to 12 hours.
51 Manual Documentation Number EIRP610-2SFP-T – 0912m
www.bb-elec.com
www.bb-europe.com