4 wiring the power inputs, Follow the steps below to insert the power wire – B&B Electronics EIRP610-2SFP-T - Manual User Manual

Page 22

Hardware Installation

3.4 Wiring the Power Inputs

Follow the steps below to insert the power wire.

1.Insert DC power wires into the contacts 1 and 2 for power 1, or 5 and 6 for power.

2. Tighten the wire-clamp screws for preventing the wires from loosing.

[NOTE]

The wire gauge for the terminal block should be 12 to 24 AWG.

Manual Documentation Number EIRP610-2SFP-T

– 0912m