B&B Electronics EIRP610-2SFP-T - Manual - Manual (Page 67)

Web-Based Management
be aggregated in a trunk group. Click Add and the ports focused in the right side
will be shifted to the left side. To remove unwanted ports, select the ports and click
Remove .
 When LACP enabled, you can configure LACP Active/Passive status for each port on
the State Activity tab.
 Click
Apply .
 Use
Delete to delete Trunk Group. Select the Group ID and click Delete .
Port Trunk—Aggregator Setting interface (four ports are added to the left field with LACP enabled)
61 Manual Documentation Number EIRP610-2SFP-T – 0912m
www.bb-elec.com
www.bb-europe.com