B&B Electronics EIRP610-2SFP-T - Manual - Manual (Page 143)

Command Sets
TFTP Commands Set
Netstar Commands Level Description Defaults Example
backup flash:backup_cfg G Save configuration to
TFTP and need to specify
the IP of TFTP server and
the file name of image.
switch(config)#backup
flash:backup_cfg
restore flash:restore_cfg G Get configuration from
TFTP server and need to
specify the IP of TFTP
server and the file name of
image.
switch(config)#restore
flash:restore_cfg
upgrade flash:upgrade_fw G Upgrade firmware by
TFTP and need to specify
the IP of TFTP server and
the file name of image.
switch(config)#upgrade
flash:upgrade_fw
SystemLog, SMTP and Event Commands Set
Netstar Commands Level Description Example
systemlog ip
[IP address]
G Set System log server IP
address.
switch(config)# systemlog ip
192.168.1.100
systemlog mode
[client|server|both]
G Specified the log mode switch(config)# systemlog mode both
show systemlog E Displays system log. Switch>show systemlog
show systemlog P Show system log client
& server information
switch#show systemlog
no systemlog G Disable systemlog
functon
switch(config)#no systemlog
smtp enable G Enable SMTP function switch(config)#smtp enable
smtp serverip G Configure SMTP server switch(config)#smtp serverip
137 Manual Documentation Number EIRP610-2SFP-T – 0912m
www.bb-elec.com
www.bb-europe.com