B&B Electronics EIRP610-2SFP-T - Manual - Manual (Page 43)

Web-Based Management
6.6.1 System configuration
 DHCP Server: Enable or Disable the DHCP Server function. Enable—the switch will
be the DHCP server on your local network.
 Low IP Address: Type in an IP address. Low IP address is the beginning of the
dynamic IP range. For example, dynamic IP is in the range between 192.168.1.100 ~
192.168.1.200. In contrast, 192.168.1.100 is the Low IP address.
 High IP Address: Type in an IP address. High IP address is the end of the dynamic IP
range. For example, dynamic IP is in the range between 192.168.1.100 ~
192.168.1.200. In contrast, 192.168.1.200 is the High IP address.
 Subnet Mask: Type in the subnet mask of the IP configuration.
 Gateway: Type in the IP address of the gateway in your network.
 DNS: Type in the Domain Name Server IP Address in your network.
 Lease Time (sec): The time period in which the system will reset the dynamic IP
assignment.
 And then, click
Apply .
DHCP Server Configuration interface
37 Manual Documentation Number EIRP610-2SFP-T – 0912m
www.bb-elec.com
www.bb-europe.com