Lacp enabled – B&B Electronics EIRP610-2SFP-T - Manual User Manual

Page 70

Web-Based Management

 LACP enabled

Having set up the aggregator setting with LACP enabled, you will see the trunking group

information between two switches on the tab of Aggregator Information.

 Switch 1 configuration

Set System Priority of the trunk group. The default is 1.

Select a trunk group ID by pull down the drop-down menu bar.

Enable LACP.

Include the member ports by clicking the Add button after selecting the port number

and the column field of Work Ports changes automatically.

Switch 1 configuration interface

Manual Documentation Number EIRP610-2SFP-T

– 0912m