B&B Electronics EIRP610-2SFP-T - Manual - Manual (Page 100)

Web-Based Management
6.21.2 Port-based Priority
Configure the priority level for each port. With the drop-down selection item of Priority
Type above being selected as Port-based, this control item will then be available to set the
queuing policy for each port.
 Port x: Each port has 4 priority levels—High, Middle, Low, and Lowest—to be
chosen.
 Click
Apply to have the configuration take effect.
6.21.3 COS Configuration (Class of Service)
Set up the COS priority level. With the drop-down selection item of Priority Type above
being selected as COS only/COS first, this control item will then be available to set the
queuing policy for each port.
 COS priority: Set up the COS priority level 0~7—High, Middle, Low, Lowest.
 Click
Apply .
6.21.4 TOS Configuration (Type of Service)
Set up the TOS priority. With the drop-down selection item of Priority Type above being
selected as TOS only/TOS first, this control item will then be available to set the queuing
policy for each port.
94 Manual Documentation Number EIRP610-2SFP-T – 0912m
www.bb-elec.com
www.bb-europe.com