Troubleshooting – B&B Electronics EIRP610-2SFP-T - Manual User Manual

Page 118

Troubleshooting

Troubleshooting

 Verify that you are using a 48VDC power supply. Applying more than 48VDC could

cause damage to the switch.

 Be sure the proper cable is used in your network. Refer to the Cabling section of this

manual for help.

 Diagnosing LED Indicators: The switch can be monitored through the LED

indicators on the front panel of the switch. The LED‘s can help describes common

problems you may encounter and where you may find possible solutions, to assist in

identifying problems.

 If the power indicators do not light on when power is applied, you may have a problem

with the power supply. Check for loose power connections, power losses or surges at

the power outlet.

 If the switch LED‘s represent normal operating mode and the cable connections are

correct and no data is transmitted or received through the switch, contact your Network

Administrator for network configuration and status help.

112

Manual Documentation Number EIRP610-2SFP-T

– 0912m