Rainbow Electronics DS26504 - Manual (Page 65)

DS26504 T1/E1/J1/64KCC BITS Element
65 of 128
12.1.1 Sa Bit Change of State
The DS26504 can provide an interrupt whenever one of the multiframe based Sa bit patterns changes.
Using the SR5 and IMR5 registers, the user can enable interrupts on a change of state for Sa4, Sa5, Sa6,
Sa7 and Sa8 multiframe bit patterns. This function is useful for monitoring the Sa6-based SSM message.
Register Name: SR5
Register Description: Status Register 5
Register Address: 21h
Bit
# 7 6 5 4 3 2 1 0
Name — — — Sa8COS Sa7COS Sa6COS Sa5COS Sa4COS
Default 0 0 0 0 0 0 0 0
HW
Mode
X X X X X X X X
Bit 0: Sa4 Change of State (Sa4COS). Set when any Sa4 bit in the 16-frame multiframe has changed state.
Bit 1: Sa5 Change of State (Sa5COS). Set when any Sa5 bit in the 16-frame multiframe has changed state.
Bit 2: Sa6 Change of State (Sa6COS). Set when any Sa6 bit in the 16-frame multiframe has changed state.
Bit 3: Sa7 Change of State (Sa7COS). Set when any Sa7 bit in the 16-frame multiframe has changed state.
Bit 4: Sa8 Change of State (Sa8COS). Set when any Sa8 bit in the 16-frame multiframe has changed state.
Bits 5, 6, 7: Unused