Safety decals, Chapter 3 safety decals – Grain Systems PNEG-707GSI User Manual
Page 9
PNEG-707 12', 18', 24' and 30' GSI Commercial Tower Dryer
9
3. Safety Decals
Some of the required safety decals are placed on the dryer before shipping. The remainder are placed
on the dryer during electrical installations. The purpose of the safety decals is to immediately alert all
personnel to the hazards of an operating dryer. The safety decal does not replace the need for all
personnel to know and understand safe dryer operations and requirements. Read the “Dryer Operations
and Service Manual”.
NOTE: Safety decals should be read and understood by all people in or around the dryer area.
Safety decals on
identify and give the location of all safety decals that should be on each
tower dryer. Safety decals are listed in numerical order.
If the safety decals on the following pages are not on the dryer, or if they are damaged, immediately
contact grain systems for replacement safety decals.
GSI Decals
1004 E. Illinois St.
Assumption, IL. 62510
Phone: 217-226-4421