Grain Systems PNEG-707GSI - Manual (Page 192)

18. Windows and Doors
192 PNEG-707 12', 18', 24' and 30' GSI Commercial Tower Dryer
Installation of Window Kits (Continued)
Figure 18U Install rolled plenum channels.
Figure 18V Drill and bolt rolled plenum channels, then
cut away from window frames.
Figure 18W Mark outside wall sheets so they will fit
inside window frame.
Figure 18X Cut outside wall sheets on inside of marked
line so they will fit inside window frame. Drill bolt holes
and bolt cut rolled plenum channels to window frame.
Door
opening