Grain Systems PNEG-707GSI - Manual (Page 176)

176 PNEG-707 12', 18', 24' and 30' GSI Commercial Tower Dryer
16. Fan Motors
See Orientation Section on Page 19 for orientation for dryer dimensions, components, wall sheet
guidelines, etc. See Appendix A on Page 435 for tools and equipment, Appendix B on Page 437 for
hardware, etc.
NOTE: Install fan motors before installing dryer windows.
Fan Motor Mounts, Fan Motors, Sheaves and Fan Belts
Fan Motor Mounts
1. Install fan motor mounts to each fan as follows.
Use hardware in standard hardware kit. (See Figure 16B.)
2. If necessary, lift dryer for clearance to install fan motor mounts.
3. Install fan motor mount to bottom of fan.
Figure 16A Fan Motor Mount (arrow)
Figure 16B Standard Hardware Kit (1 per fan)
Important Safety Precautions:
Dryer has sharp edges. These sharp edges may cause serious injury. Use
appropriate personal protective equipment. Use proper lifting techniques.