Grain Systems PNEG-707GSI - Manual (Page 36)

4. Orientation Wall Sheets and Vertical Channels
36 PNEG-707 12', 18', 24' and 30' GSI Commercial Tower Dryer
Wall Sheets Overlap
Throughout Dryer
Wall sheets are installed in overlapping rings
around dryer, starting at dryer top and working
down. Each ring of sheets vertically overlaps the
ring of sheets above it so that grain does not lodge
between. Each sheet installed horizontally overlaps
the previous sheet in the ring. In
Figure 4P , sheet
(B) laps sheet (1A), (C) laps (B), and so on around
the dryer. Each ring of sheets is installed to lap over
previous ring sheets already installed above it on
dryer: (2) laps (1A), (3) laps (2), and on down dryer.
Figure 4O Exterior View
Figure 4P Cross Section
1
B
C
2
3
A
Grain column