5 static vlan, 1 static vlan status, Table 14 vlan: vlan status – ZyXEL Communications GS-4012F/4024 User Manual
Page 85
GS-4012F/4024 User’s Guide
84
Chapter 8 VLAN
Figure 34 Switch Setup: Select VLAN Type
8.5 Static VLAN
Use a static VLAN to decide whether an incoming frame on a port should be
• sent to a VLAN group as normal depending on its VLAN tag.
• sent to a group whether it has a VLAN tag or not.
• blocked from a VLAN group regardless of its VLAN tag.
You can also tag all outgoing frames (that were previously untagged) from a port with the
specified VID.
8.5.1 Static VLAN Status
See
for more information on Static VLAN. Click Advanced
Application, VLAN from the navigation panel to display the VLAN Status screen as shown
next.
Figure 35 VLAN: VLAN Status
The following table describes the labels in this screen.
Table 14 VLAN: VLAN Status
LABEL
DESCRIPTION
The Number of
VLAN
This is the number of VLANs configured on the switch.
Index
This is the VLAN index number. Click on an index number to view more VLAN
details.
VID
This is the VLAN identification number that was configured in the Static VLAN
screen.
Elapsed Time
This field shows how long it has been since a normal VLAN was registered or a static
VLAN was set up.