ZyXEL Communications GS-4012F/4024 - Manual (Page 316)

GS-4012F/4024 User’s Guide
Chapter 45 Interface Commands 315
• Enable ingress checking on the interface.
45.2.8 frame-type
Syntax:
frame-type
where
An example is shown next.
• Enable ports one, three, four and five for configuration.
• Enable ingress checking on the ports.
• Enable tagged frame-types on the interface.
45.2.9 weight
Syntax:
weight ...
where
An example is shown next.
• Enable WRR queuing on ports 2 and 6 to 8.
• Enable port 2 and ports 6 to 8 for configuration.
sysname(config)# interface port-channel 1,3-5
sysname(config-interface)# ingress-check
untagged> = Choose to accept both tagged and untagged incoming frames, just
tagged incoming frames or just untagged incoming frames on a port.
sysname(config)# interface port-channel 1,3-5
sysname(config-interface)# ingress-check
sysname(config-interface)# frame-type tagged
...
= Sets the interface WFQ weighting. A weight value of one to eight is
given to each variable from wt 1 to wt 8 .