ZyXEL Communications GS-4012F/4024 - Manual (Page 294)

GS-4012F/4024 User’s Guide
Chapter 43 User and Enable Mode Commands 293
This command displays statistics of a port. The following example shows that port 2 is up and
the related information.
43.2.5 show mac address-table
Syntax:
show mac address-table |static>
Where
= Specifies the sorting criteria (MAC, VID or port).
sysname# show interface 2
Port Info Port NO. :2
Link :100M/F
Status :FORWARDING
LACP :Disabled
TxPkts :0
RxPkts :63
Errors :0
Tx KBs/s :0.0
Rx KBs/s :0.0
Up Time :0:02:33
TX Packet Tx Packets :0
Multicast :0
Broadcast :0
Pause :0
Tagged :0
RX Packet Rx Packets :63
Multicast :0
Broadcast :63
Pause :0
Control :0
TX Collison Single :0
Multiple :0
Excessive :0
Late :0
Error Packet RX CRC :0
Length :0
Runt :0
Distribution 64 :3
65 to 127 :44
128 to 255 :14
256 to 511 :2
512 to 1023 :0
1024 to 1518 :0
Giant :0
sysname#