ZyXEL Communications GS-4012F/4024 - Manual (Page 189)

GS-4012F/4024 User’s Guide
188 Chapter 28 IP Multicast
Table 70 IP Multicast
LABEL DESCRIPTION
Port This read-only field displays the port number.
* Settings in this row apply to all ports.
Use this row only if you want to make some settings the same for all ports. Use this row first
to set the common settings and then make adjustments on a port-by-port basis.
Note: Changes in this row are copied to all the ports as soon as you make
them.
IP
Multicast
Egress
Untag
Vlan ID
The switch removes the VLAN tag from IP multicast packets belonging to the specified
VLAN before transmission on this port.
Enter a VLAN group ID in this field. Enter 0 to set the switch not to remove any VLAN tags
from the packets.
Apply Click Apply to save your changes to the switch’s run-time memory. The switch loses these
changes if it is turned off or loses power, so use the Save link on the top navigation panel to
save your changes to the non-volatile memory when you are done configuring.
Cancel Click Cancel to reset the fields to your previous configuration.