ZyXEL Communications GS-4012F/4024 - Manual (Page 263)

GS-4012F/4024 User’s Guide
262 Chapter 42 Introducing Commands
flash Restores firmware via TFTP. 13
disable Exits Enable (or privileged) mode. 13
enable Accesses Enable (or privileged)
mode.
13
erase running-config Resets to the factory default
settings.
13
interface port-
channel
list>
[bandwidth-
limit...]
Resets to the factory default
settings on a per port basis and
optionally on a per feature
configuration basis.
13
exit Exits Enable (or privileged) mode. 13
help Displays help information. 13
history Displays a list of command(s) that
you have previously executed.
13
igmp-flush Removes all IGMP information. 13
kick tcp
ID>
Disconnects the specified TCP
session.
13
logout Exits Enable (or privileged) mode. 13
mac-flush Clears the MAC address table. 13
Removes all learned MAC address
on the specified port(s).
13
no logging Disables syslog logging. 13
ping
name>
Sends Ping request to an Ethernet
device.
13
[vlan
id>][..]
Sends Ping request to an Ethernet
device in the specified VLAN(s).
13
reload config Restarts the system and use the
specified configuration file.
13
show classifier Displays all classifier related
information.
13
[name] Displays the specified classifier
related information.
13
cluster Displays cluster management
status.
13
candidates Displays cluster candidate
information.
13
member Displays the MAC address of the
cluster member(s).
13
member config Displays the configuration of the
cluster member(s).
13
Table 105 Command Summary: Enable Mode (continued)
COMMAND DESCRIPTION PRIVILEGE