ZyXEL Communications GS-4012F/4024 - Manual (Page 290)

GS-4012F/4024 User’s Guide
Chapter 42 Introducing Commands 289
42.12 mvr Commands
The following table lists the mvr commands in configuration mode.
inactive Disables the specified VLAN. 13
ip address Sets the IP address of the switch
in the VLAN.
13
manageable
Sets the IP address of the switch
in the VLAN and allow remote
management to this IP address.
13
default-gateway Sets the default gateway IP
address in this VLAN.
13
name Specifies a name for
identification purposes.
13
no fixed Sets fixed port(s) to normal
port(s).
13
forbidden
list>
Sets forbidden port(s) to normal
port(s).
13
inactive Enables the specified VLAN. 13
ip address
address>
Deletes the IP address and
subnet mask from this VLAN.
13
ip address
default-gateway
Deletes the default gateway from
this VLAN.
13
untagged
list>
Specifies the port(s) you want to
tag all outgoing frames
transmitted with this VLAN Group
ID.
13
normal
list>
Specifies the port(s) to
dynamically join this VLAN group
using GVRP
13
untagged
list>
Specifies the port(s) you don’t
want to tag all outgoing frames
transmitted with this VLAN Group
ID.
13
Table 109 Command Summary: config-vlan Commands (continued)
COMMAND DESCRIPTION PRIVILEGE
Table 110 Command Summary: mvr Commands
COMMAND DESCRIPTION PRIVILEGE
mvr
id>
Enters the MVR (Multicast
VLAN Registration)
configuration mode.
13
exit Exist from the MVR
configuration mode.
13