ZyXEL Communications GS-4012F/4024 - Manual (Page 278)

GS-4012F/4024 User’s Guide
Chapter 42 Introducing Commands 277
reauth-period
period>
Specifies how often a client has
to re-enter the username and
password to stay connected to
the specified port(s).
13
port-
security
Enables port security on the
device.
13
Enables port security on the
specified port(s).
13
learn inactive Disables MAC address learning
on the specified port(s).
13
address-limit Limits the number of (dynamic)
MAC addresses that may be
learned on a port.
13
MAC-freeze Adds learned MAC addresses to
the static MAC table and stops
learning any more MAC
addresses.
13
queue priority <0-7>
level <0-7>
Sets the priority level-to-physical
queue mapping.
13
radius-
server
host Specifies the IP address of
RADIUS server 1 or RADIUS
server 2 (index =1 or index =2).
13
[auth-port
number>] [key
]
Sets the port number and key of
the external RADIUS server.
13
timeout <1-1000> Specifies the RADIUS server
timeout value.
13
mode
d-robin>
Specifies the mode for RADIUS
server selection.
13
remote-
management
start-
addr end-
addr service
icmp|snmp>
Specifies a group of trusted
computer(s) from which an
administrator may use a service
to manage the switch.
13
router dvmrp Enables and enters the DVMRP
configuration mode.
13
exit Leaves the DVMRP configuration
mode.
13
threshold Sets the DVMRP threshold value. 13
igmp Enables and enters the IGMP
configuration mode.
13
exit Leaves the IGMP configuration
mode.
13
non-querier Sets the switch into a non-querier
mode. It will not send igmp query
messages.
13
Table 106 Command Summary: Configuration Mode (continued)
COMMAND DESCRIPTION PRIVILEGE