ZyXEL Communications GS-4012F/4024 - Manual (Page 282)

GS-4012F/4024 User’s Guide
Chapter 42 Introducing Commands 281
secondary-
virtual-ip
<ip>
Sets the secondary VRRP virtual
gateway IP address.
13
service-
control
ftp
number>
Allows FTP access on the
specified service port.
13
http
number>
Allows HTTP access on the
specified service port and defines
the timeout period.
13
https
number>
Allows HTTPS access on the
specified service port.
13
icmp Allows ICMP management
packets.
13
snmp Allows SNMP management. 13
ssh
number>
Allows SSH access on the
specified service port.
13
telnet
number>
Allows Telnet access on the
specified service port.
13
snmp-
server
[contact
contact>]
[location
location>]
Sets the geographic location and
the name of the person in charge
of this switch.
13
get-community Sets the get community. 13
set-community Sets the set community. 13
trap-community Sets the trap community. 13
trap-destination Sets the IP addresses of up to
four stations to send your SNMP
traps to.
13
spanning-
tree
Enables STP on the switch. 13
Enables STP on a specified port. 13
path-
cost <1-65535>
Sets the STP path cost for a
specified port.
13
priority <0-255>
Sets the priority for a specified
port.
13
hello-time <1-10>
maximum-age <6-
40> forward-delay
<4-30>
Sets Hello Time, Maximum Age
and Forward Delay.
13
help Displays help information. 13
priority <0-
61440>
Sets the bridge priority of the
switch.
13
Table 106 Command Summary: Configuration Mode (continued)
COMMAND DESCRIPTION PRIVILEGE