ZyXEL Communications GS-4012F/4024 - Manual (Page 267)

GS-4012F/4024 User’s Guide
266 Chapter 42 Introducing Commands
interface port-
channel
list>
[bandwidth-
limit...]
Displays current operating
configuration on a port by port
basis. Optionally specifies which
settings are displayed.
13
service-control Displays service control settings. 13
snmp-server Displays SNMP settings. 13
spanning-tree config Displays Spanning Tree Protocol
(STP) settings.
13
ssh Displays general SSH settings. 13
known-hosts Displays known SSH hosts
information.
13
key Displays internal SSH public and
private key information.
13
session Displays current SSH session(s). 13
system-
information
Displays general system
information.
13
time Displays current system time and
date.
13
timesync Displays time server information. 13
trunk Displays link aggregation
information.
13
vlan Displays the status of all VLANs. 13
Displays the status of the specified
VLAN.
13
vlan-stacking Displays VLAN stacking settings. 13
vlan1q gvrp Displays GVRP settings. 13
port-isolation Displays port isolation settings. 13
ssh <1|2>
<[user@]dest-
ip>
Connects to an SSH server with
the specified SSH version.
13
[command ] Connects to an SSH server with
the specified SSH version and
addition commands to be
executed on the server.
13
traceroute
[in-band|out-
of-band|vlan
][ttl
<1-255>] [wait
<1-60>]
[queries <1-
10>]
Determines the path a packet
takes to a device.
13
help Displays help information for this
command.
13
Table 105 Command Summary: Enable Mode (continued)
COMMAND DESCRIPTION PRIVILEGE